impregnation
[.impreg'neiʃən]
n. 受孕, 受精, 注入, 浸渍
例句与用法：
The drawing is impregnated with the artist's personality.
这幅画充分体现了作者的个性。
词形变化：
名词: impregnation | 动词过去式: impregnated | 动词过去分词: impregnated | 动词现在分词: impregnating | 动词第三人称单数: impregnates |
n.
1. 怀孕; 受精
2. 充满; 饱和
3. 注入, 灌输
impregnation
词形变化：
名词: impregnation | 动词过去式: impregnated | 动词过去分词: impregnated | 动词现在分词: impregnating | 动词第三人称单数: impregnates |
impregnation[,impreɡ'neiʃən]n.1.■怀孕；受精2.■充满；饱和3.■浸渍；浸透4.■注入；灌输5.■浸渍液；充满他物的东西；灌输的影响
impregnationimpregnation[ˌimpreɡˈneiʃən]n.1.■浸渍2.■【动】授孕, 怀孕, 受精3.■饱和; 注入4.■(围岩中的)浸染矿床; 渗透5.■化学防护剂6.■授胎物, 授精物
impregnation
名词 impregnation:
material with which something is impregnated
the process of totally saturating something with a substance
同义词：saturation
creation by the physical union of male and female gametes; of sperm and ova in an animal or pollen and ovule in a plant
同义词：fertilization, fertilisation, fecundation
impregnation
■CNI is Chemical Nickel Impregnation with TFE overcoat.
CNI经过化学镍浸渍，并涂敷聚四氟乙烯。
■incipient-wetness impregnation method
Co-Mo／γ-Al2O3
■Melt flow through glass fiber mat during GMT melt impregnation [J].Acta Materiae Compositae Sinica, 2000, 17(3): 28-32.
GMT熔融浸渍中熔体在玻纤毡中的流动[J].复合材料学报,2000,17(3):28-32.
■PN 9213 is a universal penetrator. It is used in impregnation systems to help to penetration and distributing of filling resins. It can also improve adhesion.
PN 9213为通用型水性渗透剂。使用于填充系统加速渗透性，喷涂时改进均匀性，水性涂层中改进接着性。
■The impregnation of resin for fiber reinforcement process is a very important phase in RTM.
RTM成型过程中,树脂对纤维增强体的充分浸润是非常重要的一环。
■To meet the requirement of melt impregnation, DPS is added to improve the flow of PEEK resins.
为了满足熔融浸债工艺的要求，加入二苯砜来改善PEEK的流动性。
■In order to obtain the preferable impregnation performance and reduce the cost of C/C composite,much attention should be given to the factors of fluidity,viscidity,soft point etc.
为获得较好的浸渍性能,在提高沥青残炭率的同时,应兼顾其流动性、粘度和软化点等因素,以减少浸渍次数,降低C/C复合材料的成本。
■In order to obtain the preferable impregnation performance and reduce the cost of C/C composite, much attention should be given to the factors of fluidity, viscidity, soft point etc.
为获得较好的浸渍性能，在提高沥青残炭率的同时，应兼顾其流动性、粘度和软化点等因素，以减少浸渍次数，降低C/C复合材料的成本。
■Main design index of bonding mixing equipment for impregnation in polyester spunbonded production line is introduced in the paper. The moving course of fluid is analyzed.
主要介绍了聚酯纺粘线中浸胶处理的胶乳混合设备主要参数的设计,并分析了搅拌过程中流体的运动过程。
■The process to enhance anti-oxidation property of the pure graphite ma terials by impregnation with phosphates and its influence factor were investigat ed.
主要介绍了采用浸渍磷酸盐溶液的方法来提高高纯石墨材料抗氧化性的工艺研究和影响因素。
■These adhesives can be used for tightening screw and impregnation of micropore.
主要用于各种螺纹件的锁固密封和金属零部件微孔的浸渗密封。
■The electrochemical impregnation (ECI) in ethanol-water solution is of great value for application.
乙醇-水溶液二元体系电化学浸渍具有很高的实用价值。
■The concept of telegonic impregnation was expressed in Greek mythology in the origins of Greek heroes.
亚里士多德相信这个理论，而在中世纪对亚里士多德的再认识中，这个理论又复苏了。
■artificial impregnation instrument
人工受孕机械
■syringe for artificial impregnation
人工授精注射器, 精液注射器
■catheter for artificial impregnation
人工授精用导管(兽医用)
■speculum for artificial impregnation, vaginal
人工授精用开腔器
■thermometer for impregnation appliances
人工授精用温度计(兽医用)
■In this paper the current development of carbon-graphite materials with glass impregnation, its excellent per fomance, production process, and application were introduced.
介绍了浸玻璃碳石墨材料的发展现状、所具有的优异特性、制造工艺以及应用实例等。
■From the Pt loading and catalyst activity, the conditions of the electrolytic impregnation were studied.
从催化剂的负载量和催化活性出发,对电解负载的实验条件进行了探讨。
■This paper studies the in-situ toughening of the alumina foamed ceramics from the perspectives of percentage of water absorption of biscuits,viscosity of sol and impregnation technique.
从素烧坯体吸水率、溶胶粘度、浸渍工艺三个方面对氧化铝质泡沫陶瓷的原位增韧进行了研究。
■Activity of the catalyst was eveluated with SO_2 hydrogenation and H_2S hydrolysis. Activitiy of wet-mixing kneading CoMo/Al_2O_3 catalyst was compared with catalyst of same composition prepared by impregnation.
以SO2的加氢反应和CS2的水解反应为指标反应,考察了CoM o/A l2O3催化剂对C laus反应尾气的加氢转化活性,并与浸渍法CoM o/A l2O3催化剂进行对比;
■The heteropoly acid (PW_(12)) supported on montmorillonite modified by surfactant catalyst was prepared by means of impregnation and refluxing-adsorption methods.
以表面活性剂修饰的蒙脱石为载体,选取不同溶剂,采用浸渍法、回流吸附等方法,将磷钨杂多酸负载于表面活性剂修饰的蒙脱石上。
■Novel Ti-doped silica gel adsorptive materials were prepared by treating ceramic fiber paper with the sequential impregnation of water glass and the aqueous solution of acidic titanium salt.
以陶瓷纤维纸为基材,依次经水玻璃、酸性钛盐溶液浸渍制得新型钛掺杂硅胶吸附材料。
■To improve the impregnation degree, properly prolonging processing time, moderately raising temperature,increasing porosity of mat and filanent diameter, reducing fiber ...
但升高温度和提高浸渍压力对浸渍过程的影响相对较小。
■Capillary impregnation of pure resins in the transverse direction of unidirectional cloth beds was studied elementarily by using self-designed fiber holder.
使用自行设计的夹具对纯树脂沿纤维织物厚度方向的毛细浸渗行为进行了初步研究。
■The effect factors on RTM microscopic impregnation process were analyzed with help of dimensionless analysis.
借助无量纲分析,研究了RTM工艺微观浸润过程的影响因素。
■coprecipitation and wet impregnation
共沉淀-浸渍法
■Keywords co-precipitation;impregnation;isobutylene;methacrolein;
共沉淀法;浸渍法;异丁烯;甲基丙烯醛;
■Levaditi's silver impregnation
列瓦迪提(氏)镀银法
■The model is further applied to the structure of mixed premix.It shows that the impregnation time of wrapped structural premix is just trifle greater than that of mixed structural premix.
利用该模型对混合结构预混料的进一步研究发现,包缠结构预混料中丝束的完全浸溃时间仅略长于混合结构预混料。
■precursor impregnation procedure
前体浸渍法
■Strength properties: Provided the treated timber is redried after impregnation, the treatment with ACQ-DB does not influence any strength properties of the timber.
力学性能：ACQ-DB防腐木材干燥后，木材的任何力学性能不会受到损失。
■Zona pellucida (ZP) plays a key role in the recognition, combination and penetration of sperms and oocytes, the prevention of multiple impregnation, the protection of embryos, and so on.
卵透明带(ZP)在精卵识别、结合、穿透以及阻止多精受精和保护着床前胚胎等方面起关键作用,与男性生育关系密切。
■Impregnation and Dying of Ancient Jade and Identification
古玉的沁色、染色及鉴别
■There are also: tailoring, welding, painting, sandblasting, the entire flat, polished, galvanized, IMPREGNATION, vol circle forming, anodizing, coloring, such as technology and equipment.
另外还有：剪裁、焊接、喷漆、喷沙、整平、抛光、镀锌、浸塑、卷圆成型、阳极氧化、着色等工艺和设备。
■One can recover about 76% of the total SO2 initially charged for chip impregnation.
可回收的总二氧化硫(total SO_2)量约为木片浸渍液中原加入总二氧化硫量的76%。
■Below the premise that makes sure impregnation is measured, increase the concentration of macerate albumen as far as possible, can decrease..
在保证浸胶量的前提下，尽量提高浸渍胚乳的浓度，可以减...
■Casting repairs can be carried out after IVECO authorization No. repairs are admissible by means of impregnation unless otherwise specified on drawing or by explicit derogation.
在取得IVECO授权编号后，进行修理铸件。除非图纸特别说明或外在损坏，用注入的方法修理是允许的。
■Experiments were carried out in Great Britain and American on the impregnation of wood with vegetable tars and extracts.
在大不列颠和美州就进行过用植物焦油和提取物来浸渍木材的试验。
■In addition, the coverage and number of carbon layers in CCA can be easily controlled by changing the sucrose content in the precursors and the impregnation times.
在这种复合材料中，碳层厚度可控制为一个石墨单层的厚度，且碳的覆盖度及层数可以通过改变浸渍的蔗糖量及浸渍次数来进行调控。
■The catalyst prepared by impregnation method had good performance in both activity and selectivity,and contained 0.8 molar ratio of chrome and vanadium and 1.2 molar ratio of phosphorus and vanadium and with activated alumina as support.
在铬钒摩尔比为0.8、磷钒摩尔比为1.2、以活性氧化铝为载体的条件下,采用浸渍法得到的CrVPO型催化剂性能最好.
■Subsequent to the pre-washing zone, impregnation of the fabric with scouring and bleaching chemicals takes place.
在预水洗区之后，织物浸渍以煮练剂和漂白剂。
■PROSPECTING DISPERSED IMPREGNATION IN DAM BY GPR
地质雷达勘察坝体“散浸”
■It is proved by practice that silane impregnation can improve substantially the corrosion resistance of marine reinforced concrete.
实践表明，硅烷浸渍能显著提高海工钢筋混凝土结构的防腐蚀性能。
■Results show that cold plasma treatment improves the surface polarity and impregnation of carbon fiber, which increases the bonding property of carbon fiber braid/epoxy composites, and there...
实验结果表明,冷等离子体处理提高了碳纤维表面活性、浸润性,从而改善了碳纤维缝编织物/环氧复合材料的界面粘结性能,进而改善了复合材料的界面性能。
■The combined hysteroscopy and laparscopy could improve the repatency rate of salpinxes (81.94%) and the impregnation rate (54.63%).
宫腔镜、腹腔镜联合应用能提高输卵管复通率(81.94%)及受孕率(54.63%)。
■The current situation and characteristic of vacuum impregnation process and equipment in refractory industry in China are analyzed and introduced.
对我国耐火材料行业的真空浸渍工艺及设备现状进行了分析,介绍了国产化真空油浸装备及工艺特点。
■The results showed us that the key factors in preparation of SAC from IER were air oxidation, KOH impregnation, carbonization and the temperature rate of heating.
对氧化过程中树脂的变化进行了红外分析，提出了“树脂经空气氧化结合了大量氧原子，从而能够抑止碳元素的脱除”是碳收率提高的原因所在。
■The activation of terres rares in aluminum impregnation changing with temperature,and the effect on seeping depth are discussed.
对渗铝中稀土的活化作用随温度的变化及对渗层深度的影响等进行了探讨。