tangency
['tændʒənsi]
n. 接触, 相切
例句与用法:
Mr and Mrs Tang went the whole journey in a small buggy, with their child riding bodkin.
唐先生和唐太太一路上乘坐一辆轻型马车,让孩子挤坐在他俩中间。
Even Uncle Tang lost control of himself for a moment.
有一阵子连唐大叔都控制不住自己了。
One of the workers who followed in his steps as an innovator was Tang Ying.
还有一个跟他闹革新的工人,那就是唐英。
The Tang Dynasty is a period remarkable for its liberality.
唐朝是一段以开明著称的时期。
词形变化:
异体字: tangence |
n.
相切, (在一点上的)接触
tangency['tændʒənsi]n.1.■【几何学】相切;(在一点上)接触
tangencytangency[ˈtændʒənsi]n.1.■接触;【数】正切, 切线
tangency
名词 tangency:
the state of being tangent; having contact at a single point or along a line without crossing
(electronics) a junction where things (as two electrical conductors) touch or are in physical contact
同义词:contact
tangency
■But earnestly, what is the tangency of grumbling most how unbalanced this testament neaten the brave when SE hasn't justified elaborated out how equipment instrument be deleveled.
(细节请见奉化溪口资讯站:版权信息).如果您不希望您的文字被任意修改和再散布,请不要提交。
■G1 means they are smoothly connected up to one differentiation, or are tangency continuous.
G1 意味着两个对象光顺连接,一阶微分连续,或者是相切连续的。
■The tangency point is known as the pitch point.
两节圆的切点成为节点。
■To avoid overmany crossings of FW layers, whichreduce the using of the filament strength, the number of the tangency points is chosento one.
为了避免FW层的交叉点过多而影响纤维强度的发挥,所选择的切点数为1个。
■CAUTION: Tangency between cylinders occurs at the center plane of the cylinders only if the cylinders are of equal diameter.
仅当两个圆柱孔直径相等时,相切发生在圆柱中心平面。
■With intangible assets as a point of tangency,this paper first probes into the dialectical relations between the library and all kinds of informations and their veers under the conditions of network.
以无形资产为切入点,探讨图书馆在网络环境下与各类信息源及用户的辩证关系;
■You can not move the 2nd control point from each end, Because that will make the curve loose its tangency direction.
你不能移动的第2次控制点从每个月底,因为这将使松散的曲线相切的方向发展。
■Trim with first tangency surface
使用第一切面修剪
■Trim with second tangency surface
使用第二切面修剪
■The new Wire Editor delivers greater flexibility for making changes to 3D curves, while automatically detecting and protecting established tangency conditions.
全新的线架构编辑功能将带来更大的弹性进行空间曲线的修改。
■Keywords Shoe last, CAD/CAM technology, Free-surface modeling,Shoe last design and modification, Discrete surface dynamic tangency;
关键词皮鞋楦;CAD/CAM技术;自由曲面造型;鞋植设计;离散曲面动态求交;
■tangency condition
切向运动条件
■point of tangency
切点
■calculation of the points of tangency
切点计算
■The tangency line slope would be dP/dQ and the slope of the secant would be the numerical value P/Q.
切线的斜率是dP/dQ,而割线的斜率则可以表示为P/Q。
■Create the pillars surface using curve network with the tangency option checked were possible.
创建的支柱表面使用曲线网络与相切选项检查是可能的。
■Create the surface using sweep 2 rails with the tangency option on. To achieve tangent option you will have to build the surface in parts.
创建表面使用扫描第2轨与相切选项。为了实现切线选项,您将必须建设中的表面部分。
■Moon enters umbra: Instant of first external tangency of Moon with the umbra.
初亏:月球由东缘慢慢进入地影,月球与地球本影第一次外切。
■With the Lagrange multiplier method, the minimum distance of the center of a circle and a quadric surface was provided and the tangency condition of curve and surface was given.
利用拉格朗日乘子法求解二次曲线和二次曲面之间的最小距离,给出了曲线与曲面相切的条件。
■Moon enters penumbra: Instant of first external tangency of Moon with the penumbra.
半影食始:月球刚刚和半影接触,这时肉眼觉察不到。
■Moon leaves penumbra: Instant of last external tangency of the Moon with the penumbra.
半影食终:月球离开半影,整个月食过程正式完结。
■Keywords printing and dyeing wastewater;the biology tangency oxidizes method;wastewater treatment;
印染废水;生物接触氧化法;废水处理;
■the satisfaction of flow tangency at panel control points;
在小板控制点上流动与小板相切的补偿;
■The tangency point of Bottom Hole Assembly is located at where the drill string just touches the wall of the borehole, and the contact force is zero here.
在计算底部钻具组合的受力和变形时,以前一般都是按弯矩为零的条件来确定其上切点的位置。
■Based on the analysis,determine the unicity of point of tangency and point of intersection.
基于在解析几何的基础上确定了切线和交点的唯一性。
■Moon leaves umbra: Instant of last external tangency of the Moon with the umbra.
复圆:月球逐渐离开地球本影,与地球本影第二次外切。
■Spotting the Point of Tangency is the Inexorable Trend in Higher Education of Biology
大学生物教育的发展必须适应中学生物的教学
■Keywords Macro-program;variable;point of tangency;ellipse;
宏程序;变量;切点;椭圆;
■parallel tangency
并行正切法
■This paper studied the case that there is a known point of tangency of a circle and a parabola while the center of the circle is on the recession of the parabola.
应用数形结合的方法,研究了已知圆与抛物线有一个切点,而圆心在切点处抛物线的凹向的情形。
■tiny tangency plane
微切平面
■You may also need to create additional surfaces too achieve the desired tangency.
您可能还需要创造更多的表面也实现理想的切。
■Through square and triangular permutation ways of cutting identical dimension on steel plate, the first model of computational combinatorics is set up by tangency permutation method.
排列组合内容抽象,富于技巧;它的思想方法也别具一格,知识间的联系,主要靠抽象思维来把握。
■Exploring the new point of tangency of the ideological and political work
探寻思想政治工作新的切入点
■tangency stress
接触应力
■Therefore, the method to determine the position of tangency point should be based on this condition instead of the traditional one which requires the moment is zero here.
提出了一种新观点,即按照钻柱与井壁的接触力为零的条件来确定这一位置。
■The category of “Market forces”may be the entrance of tangency or the category of starting point to recognize the deep-layer structure of the market and its inherent operational mechani...
本文将“市场力量”作为一个科学范畴来研究,主要考察市场力量的存在性、内涵、结构及其与其他相关范畴的关系。
■Evaluation Method of Force Analysis in Tangency Direction of General Opposite Force to Frictional Circle
机构受力分析中总反力相切方向判定法则
■Flow changeability of polyacrylic amid under the extreme tangency speed
极低剪切速率下聚丙烯酰胺的流变特性
■I.Lin Fu sees Lynn Fuchs is a special education professor and at vent built Vanderbilt University in Nashville, Tangency Tennessee.She studies R.
林恩方思是田纳西州纳什维尔范德比尔特大学的一位特殊教育专家。
■accurately,such as minuteness,more deformable that unfit for tangency measurement. This method has a wide application foreground.
此种测量方法非常适合于微小、易形变等接触测量难以准确测量的机械零件的参数检测,具有广阔的应用前景。
■This method is propitious to measure mechanical accessory accurately such as minuteness, more deformable that unfit for tangency measurement.This method has a wide application foreground.
此种测量方法非常适合于微小、易形变等接触测量难以准确测量的机械零件的参数检测,具有广阔的应用前景。
■Production equilibrium comes at the tangency point, where an equal-product curve touches but does not cross the lowest TC curve.
生产均衡出现在等产量曲线和总成本曲线的切点处。
■Discussion on printing and Dyeing Wastewater Treatment by the Biology Tangency Oxidizes Method
生物接触氧化法处理印染废水探讨
■Tangency is controlled by the first two control points from a surface boundary, assuming that these points lie in one line.
相切是由曲面边界的最初两个控制点控制的(假设这些点在一条线上)。
■Tangency SDH Loop
相切组网
■Keywords phase transformation diffusion bonding;tangency stress;friction stress;physical contact;
相变扩散连接;接触应力;摩擦应力;物理接触;
■To determine the point of tangency and the point of interaction of the line segment of the section pass meaningful to the pass analysis and wire cutting program.
确定型钢孔型各线段的切点或交点对孔型分析及线切割程序有重要意义。
■Keywords fiber grid;surface tension;moist;tangency angle;capillarity;
纤维栅;表面张力;湿润;接触角:毛细现象;
■self tangency
自切