extruded
adj. 压出的, 挤压的
动词extrude的过去式和过去分词
例句与用法:
She's a good person to invite to a party because she's such an extrovert.
最好把她邀来参加聚会,因为她很爱交际。
Extroverts prefer lively conversation to brooding on the meaning of life.
性格外向的人喜欢高谈阔论,而不愿思索人生的意义。
词形变化:
动词过去式: extruded | 动词过去分词: extruded | 动词现在分词: extruding | 动词第三人称单数: extrudes |
extruded
词形变化:
动词过去式: extruded | 动词过去分词: extruded | 动词现在分词: extruding | 动词第三人称单数: extrudes |
同义词:
反义词:
intrude |
extruded
■CTR was fixed in the capsule in 13 eyes and partly extruded out of the capsule in 2 eyes.
13眼CTR植入囊袋内,2眼部分脱出囊袋外。
■At impact energy of 2.7 J, it is mainly spalling of extruded hardened edge for LCHA, primarily massive fatigue spalling and heavy corrosive wear for HMN and principally massive brittle spalling and heavier corrosive wear for MCA.
2 7J冲击功下,低碳高合金钢主要为挤出硬化棱的剥落,高锰钢主要为块状疲劳剥落和较严重的腐蚀磨损,中碳合金钢主要为块状脆性剥落及严重的腐蚀磨损;
■It is spread on end face of extruded shim to make shim separate with discard. 3.
2、涂于挤压垫片端面,使垫片与压余分离。
■Materials extruded have been plasticized evenly.
5、 配备的强力干燥设备能有效地解决高速生产过程中滴灌管的带水问题。
■BIH, and the density and foam structures of the extruded free low foamed HIPS properties, the influence of the crosslink-ing agent and nucleator on HIPS product were discussed.
BIH与HIPS挤出自由低发泡制品的密度和泡孔结构的关系,以及交联剂、成核剂对制品的影响,并利用偏光显微镜观察了泡孔结构形态。
■GLE is a library package of C functions that draw extruded surfaces, including surfaces of revolution, sweeps, tubes, polycones, polycylinders and helicoids.
GLE是一个C函数库包,它能绘制突出的表面,包括旋转表面,伸展表面,管状,多角体,多柱体和螺旋面。
■"Flamingo" is an international brand of construction ceramics owned by Chongqing Fuling Ceramics Group, which includes five diamond series of product on porcelain tile, roofing tile, external tile, crystal glass and extruded tile.
“佛来明哥”是涪陵建陶全新推出的国际化精品建陶品牌,旗下包含玻化石、晶化石、西式石、劈离砖、太阳神外墙砖五大钻石级产品系列。
■The"pocks"is one of the most important surface defects in extruded aluminium alloy.
“麻面”是影响铝合金挤压材表面质量的主要缺陷之一。
■A manufactured fiber formed by compound of cellulose, refined from cotton linters and/or wood pulp, and acedic acid that has been extruded through a spinneret and then hardened.
一个制造纤维所形成的复合纤维素,完善由棉短绒和/或木浆,和acedic酸已被挤压通过喷丝板,然后硬化。
■XPS insulation specialized in the use of rigid extruded polystyrene foam plate and the production of the products of machinery and equipment.
专业从事XPS保温用挤塑发泡聚苯乙烯硬质厚板以及生产该种产品的机械设备。
■To make winter gear that dissipates moisture but holds in heat, manufacturers use specially extruded hollow fibers that retain insulating air.
为了制造可蒸散水气同时又要保留热气的冬衣材质,业者使用特殊射出的中空纤维,这样可以留住空气,增加隔热的效果。
■To decrease bending and twist deformation of non-sym metry extruded sections, a new conception of local extrusion ratio and die band ratio has been set up, and also the formulas for the place of die hole on the ba sis of simulating test.
为减小非对称型材挤压的弯扭畸变,在试验研究的基础上,建立了局部挤压比、挤压带系数的概念,挤压筒中心与挤压模孔型中心相对位置的计算式。
■VPI.Your source for extruded plastic sheet, plastic rollstock and custom plastic extrusion products.
乙烯基塑料公司提供挤压成型塑料板,传统塑料挤压产品。
■Today large quantities of lead still go into the manufacture of rolled sheet and extruded pipe.
今天,大量的铅仍然用来轧制成铅板或挤压成铅管。
■An extruded self adhesive tape for lap seam of EPDM sheet has brominated butyl rubber as main ingredient and appropriate aids.
介绍了一种以溴化丁基橡胶为主体材料,加入适当的化学助剂,经挤出成型的三元乙丙橡胶高分子片材搭接缝用自粘胶带。
■Polypropylene as a matrix was blended with BaSO 4 developing agent, then extruded and granulated by double|screw extruder, and finally X|ray developing fiber was obtained.
以聚丙烯为基体,硫酸钡为显影剂,共混后经双螺杆挤出造粒、纺丝,制得X光显影纤维。
■PP and PA6 were blended and extruded with a single screw extruder, PA6 could fibrillated in the matrix.
以聚丙烯为基体、尼龙6为分散相共混得到分散相成纤的原位复合材料。
■Black masterbatches with high degree of jetness, stable colour and excellent dispersion.suitable for the coloration of the injected, blown and extruded products of common resins.
优质黑色色母具备黑度高、颜色稳定及分散性能良好等优越性能,适用于常用树脂的注塑、吹塑、挤塑等制品的着色。
■The tank shall have extruded magnesium anode rods installed in separate head couplings and extended to within three inches (76mm) of the bottom.
内胆应该配置突出型镁阳极棒,安装在独立的连接口上,并延伸至离内胆底部三英寸(76mm)的地方。
■All kinds of reasons of extruded die cracked is analysised when profile is hot extruded,and take the method of preventing and remedying.
分析了异型材热挤压时造成挤压模具开裂失效的各种原因,并提出了预防和补救措施。
■Design and manufacture of extruded plastic parts, blow-moulding, all business sectors. Plastics,...
分类标题:橡胶和塑料挤压|橡胶和塑料吹塑注模...
■Extruded PVC profiles, textile-reinforced tubes, gardening hoses, irrigation, TRICOT electrical...
分类标题:橡胶和塑料管及管道|花园灌溉设备...
■Microstructures and mechanical properties of extruded tubes of AZ91+XCa (X=0, 0.5, 1, 1.5 wt. %) alloys were investigated using OM, SEM, XRD and mechanical property test.
利用OM,SEM,XRD及力学性能测试等手段,研究了添加Ca元素的AZ91+XCa(X=0,0.5,1.0,1.5,wt%)合金挤压管材的显微组织及室温和高温力学性能。
■Beijing Boke Man extruded products limited liability company is set extruded polystyrene for insulation boards (XPS) production, sales and service in one of the modern enterprise.
北京波科曼挤塑制品有限责任公司是集挤塑式聚苯乙烯保温板(XPS)生产、销售、服务于一体的现代化企业。
■Beipeng Extruded Thermal Insulation Boards feature superfine thermal insulating properties. The thermal resistant value our products is significantly better than any other thermal insulating materials.
北鹏挤塑保温板具有极佳的保温隔热性能,其产品热阻值明显优越于其它保温材料,导热性低而稳定,不受温度也不受湿度变化的影响。
■Beipeng plastic extruded board can be widely used in planting roofing, a brand new environmentally-friendly heat insulation form, and give good use effect.
北鹏挤塑板可广泛应用于种植屋面这一全新的环保型的保温形式中,其使用效果良好。
■The results show that the fluidity of extruded state alloy is the lowest.
半固态坯的流动性能是获得优质、复杂制件的基础和关键。
■The reason is that on a number of extruded compound modification oilysludge, just one layer on the heatsealing layer blending, middle-tier also may be in a lower-cost.
原因是对多层共挤复合基材进行改性,只需在其一层热封层上进行共混改性,在中间层还可采用成本较低的树脂。
■Factory nade products of extruded polystyrene foan (XPS).
参考名称: Thernal insulation products for buildings.
■The Film blowing machine's feature is used LDPE as materials, after being heated, extruded, drawn an...
发布者:夏丽丹所在地:浙江温州市行业:机械及行业设备职位:外销员工作年限:
■Sample with a higher DI value can be extruded easily and corresponded to a small average particle size.However no correlation was observed between pore structure and DI value.
发现平均粒度小和成型效果好的样品有较大的酸分散指数,但酸分散指数与样品的孔结构无直接关系。
■It was concluded that this defect is not surface crack indeed,but cross extruded wrinkle rising from inhomogeneous deformation.
发现这种缺陷实际并非表面开裂,而是由于变形不均匀造成的横向挤压皱折。
■Can be used as polystyrene board (EPS) insulation systems and extruded plate (XPS) insulation system of leveling material.
可以作为聚苯板(EPS)保温系统和挤塑板(XPS)保温系统中的找平材料。
■Because they have been extruded or pored out on the earth's surface, igneous rocks from volcanoes are called extrusive igneous rocks.
因为这种火山岩是熔岩喷出地球表面而形成的,所以称之为喷出岩。
■With outstanding vapor infiltration and compression resistances, Beipeng plastic extruded board excels in application in refrigeratory buildings.
因材料具有闭孔式蜂窝结构,因而高度抗潮隔气,防止冷凝结露。
■It is relatively palatable without the sprayed-on fats and other enhancers needed on extruded dry food.
因此它是相对地比较美味,不需要喷洒油脂和其他添加物。
■The wave forms of the glass building are highlighted by a series of extruded aluminum brush finish mullions, following the vertical, curvilinear shape on the north and south facades.
国际中心的南北立面分别为曲线和垂直线状,一排排铝质磨砂竖框依势外突,凸显了这栋玻璃幕墙建筑物的波浪形效果。
■Rosette-shaped, extruded aluminum action rails and flanges (grands) provide increased stability and less frequent regulation.
圆形模压铝制的横档和轴架都能提高稳定性从而减少日常整音。
■Potato starch is used in extruded cereal and snack food products and in dry mixes for soups and cakes.
土豆淀粉用于压模成形谷物、小吃、干的混合汤料和糕点。
■The results reveal that the solid solution and aging treatments will lead to a change in both cyclic stress response and cyclic stress-stain behavior of the extruded AM50 alloy.
在高的外加总应变幅下,固溶和时效处理可以提高挤压变形AM50镁合金的疲劳寿命,但当外加总应变幅较低时,固溶和时效处理则降低挤压变形AM50镁合金的疲劳寿命;
■Subway advertisement has strong pertinency, covers large fields, and has extruded effects of the advertisement.
地铁广告的针对性较强,覆盖面广,广告效果突出。
■The try of success of 100% percent of pass of the forming spout and ultra - short spout, extruded nature exfoliate graphite resistor rod was obtained.
型嘴与超短嘴子,挤压天然鳞片石墨电极合格率100%的尝试获得成功。
■Plastic material is extruded through very small holes to form fibres.
塑料从细孔中挤压出来形成纤维。
■Any of various organic compounds produced by polymerization, capable of being molded, extruded, cast into various shapes and films, or drawn into filaments used as textile fibers.
塑胶通过聚合作用制成的一种有机化合物,能被造型,挤压和塑铸成各种形状或薄膜,也可被拉成细丝用作纺织纤维
■Any of various organic compounds produced by polymerization,capable of being molded,extruded,cast into various shapes and films,or drawn into filaments used as textile fibers.
塑胶通过聚合作用制成的一种有机化合物,能被造型,挤压和塑铸成各种形状或薄膜,也可被拉成细丝用作纺织纤维。
■Application This line is uesd to shrinking、 cooling、 cutting (or winding) and moving the extruded tire-tread or tire-sidewall from extruder.
备用途:用于将从挤出机挤出的胎面、胎侧半制品,经收缩、冷却,按要求的长度切割或卷曲取并移送到专用的运输工具上。
■External wall insulation system with three approaches: extruded polystyrene board, commonly known as XPS boards, or expansion of polystyrene board, commonly known as EPS plate.
外墙保温体系有三种做法:用挤塑聚苯板,俗称XPS板,或者膨胀聚苯板,俗称EPS板。
■The baby extruded his tongue.
婴儿伸出舌头。
■Obvious yield phenomenon can be observed at true stress-strain curve of compression of extruded alloy as the result of twinning.
孪晶的产生,导致挤压合金室温压缩的应力-应变曲线上有屈服平台出现;
■Safety glass shall set into rails in deep into an extruded polyvinyl chloride glazing channels.
安全玻璃安装在聚氯乙稀滑槽内。