lugs
[lʌg]
[ lugs ]
n. 柄, 突出部, 螺帽
n. (英)耳朵
<俚>笨蛋
vt. 拖, 拉, 用力拖动
例句与用法:
His fiddle is in lug just now.
他的提琴眼下正押在当铺里。
She lugged the suitcase out into the hallway.
她吃力地将提箱拖进门厅。
Do I have to lug those suitcase all the way to the station?
难道非要我把那些手提箱一直拉到车站去吗?
Do I have to lug those suitcases all the way to the station?
难道非要我把那些手提箱一直拉到车站去吗?
词形变化:
动词过去式: lugged | 动词过去分词: lugged | 动词现在分词: lugging | 动词第三人称单数: lugs |
lugs
名词 lug:
ancient Celtic god
a sail with four corners that is hoisted from a yard that is oblique to the mast
a projecting piece that is used to lift or support or turn something
同义词:lug
marine worms having a row of tufted gills along each side of the back; often used for fishing bait
动词 lug:
carry with difficulty
obstruct
lugs
■1 Lugs may be removed at customer‘s request - POA.
1根据用户要求可去掉凸耳-POA.
■Lock washers with angular upturn tab perpendicular to the lug
GB/T1021-1976角形垂直单耳止动垫圈
■Lock washers with angular upturn tab in line to the lug
GB/T1022-1976角形单耳止动垫圈
■collaboration pattern of lUG
IUG合作模式
■"Where do you keep all the stuff we lug in our handbags?"
“我们手袋里的那些东西你们往哪儿放?”
■"T maister nobbut just buried, and Sabbath not o ered, und t sound o t gospel still i yer lugs, and ye darr be laiking!
“老主人刚刚下葬,安息日还没有结束,福音还在你们的耳中回荡,而你们竟敢玩!
■"They put on a lot of lugs here, don't they?
“这里的人的架子可不小,是不是?”
■These carton pockets need to be adjusted to accomodate a larger carton, therefore widening the distance between the pusher and retarder lugs is necessary.
。如果需要根据纸盒尺寸的不同而调整此空间大小,就应增大推杆突耳与阻滞突耳之间的距离。
■6 In general, vessels shall be provided with two earth lugs.
一般情况下容器应有两个接地耳。
■Last week we went shopping, I had to lug my wife's purchases all over Wangfujing.
上周我们去购物了,我提着我老婆买的那些个东西穿过了整个王府井大街。
■Tightening down on special tool will push wheel stud out of the hub and bearing assembly flangRemove lug nut from stud and remove wheel stud from flange.
上紧特殊工具,即可将车轮螺桩推出轮毂及轴承组件。自螺桩取下凸缘螺帽并自凸缘取出车轮螺桩。
■coupler head upper pivot lug
上钩耳
■The striker has a lug that interacts with the sear and is used to hold the striker in the cocked position.
下手帮手有一个与柄互动的那枯萎的而且用来在被耸立的位置中捉住下手帮手。
■Unnecessary services were disabled, all scripts and third-party apps were carefully audited, and user privileges were tightened with a lug wrench.
不必要的服务是残疾,全部的手稿和第三者附录被仔细审计,并且用户特权被一把吊钩扳钳收紧。
■This paper introduces a lug mantle and solution of bottom protuberance.
介绍一种代替深拉深的变通两体风罩结构,及底部外鼓的解决办法。
■They gave me so many samples and company brochures. It 's a heck of lot to lug around now .
他人给我这么多样品和公司简介。 太多了,现在带起来可真吃力。
■They gave me so many samples and company brochures. It 's a heck of lot to lug around now.
他人给我这么多样品和公司简介。太多了,现在带起来可真吃力。
■They give me so many samples and company brochures. It's a heck of lot to lug around now.
他们给我这么多样品和公司简介,现在带起来可真吃力
■They give me so many samples and company brochures. It 's a heck of lot to lug around now.
他们给我这么多样品和公司简介太多了,现在带起来可真吃力
■He and hiswife, He Cuifeng, had to lug it home to their remote village on apublic bus.
他和妻子何翠凤(音)不得不搭乘公共汽车将洗衣机运回自己在偏远村庄的家。
■He lugs samples of it around in a suitcase like some environmental traveling salesman.
他用手提箱携带样本,有如环保旅行推销员。
■His fiddle is in lug just now
他的提琴眼下正押在当铺里。
■Solderability tests for component leads, terminations, lugs, terminals and wires
件引线、终端、焊片、接头和金属丝的软钎焊性试验
■STRENGTH ANALYSIS OF LUGS IN ANY ANGLE LOADING
任意角度受载的耳片强度分析
■Bo Le was both aggrieved and regretful when he saw how such a fine horse was exhausted to its present condition and being used to lug a salt cart.
伯乐看到优良的好马竟被用来拉盐车,还累成这个样子,很是痛心和惋惜。
■You'll have to lug this suitcase.
你将不得不手提这个衣箱。
■For a guy who lugs parcels all day, you don't know much about baggage.
你曾身处其中,确并不明白其中的道理。”
■For example, figure 1 shows an outer cylinder clevis plated into the lug transition.
例如,图1示意了外筒U形夹的镀层延伸到了接耳的过渡段。
■Aggressive lugs let you plow through dirt and mud.
侵略性派让你犁通过污物和泥土。
■Lifting lugs on insulated vessels shall project sufficiently to allow shackles to clear the insulation.
保温容器上的吊耳应伸出足够的长度以允许钩环清除保温层。?
■DOING WELL, YOU BIG LUG OF BEAR! THE NEXT DELIVERY IS TAKING YOU TO THE CAVE. FLY CAREFULLY, HOT SHOT, THE CAVE'S NARROW AND YOU'RE NOT!
做很好,您大把手熊!下交付把您带对洞。飞行仔细地,热的射击,洞的狭窄,并且您不是!
■Insert and thread #2 Check first and then #1 Check. #2 Check should be tightened by inserting a long screwdriver between lugs to tighten firmly (see figure 2) .
先插入并旋进2号止回阀,然后是1号止回阀。2号止回阀应该通过在凸耳之间插入螺丝起子进行紧固,紧固要牢固(参阅图2)。
■Completely pre-wired - with pressure lug terminal block eliminating need for splicing or taping of wires.
全部预置线路--配置弹性接线片的终端接线盒,不需要再缠绕和捻接电源线。
■Next, remove the hubcap. (Follow your car manual.) Use a lug wrench to loosen the lug nuts.
其次,(按汽车说明书方法)取下轮毂罩用一把轮胎扳手拧松螺母盖。
■Next, remove the hubcap. (Follow your car manual.) Use a lug wrench to loosen the lug nuts. Give each a turn counterclockwise, but leave the nuts in place to keep the wheel attached.
其次,(按汽车说明书方法)取下轮毂罩用一把轮胎扳手拧松螺母盖。对每只螺母盖逆时针拧一下,但让它们留在原位置以让轮子不脱下。
■The grapes are put into small lugs that hold only 30 pounds of fruit.
其采收都是趁清晨低温时手工采收,然后果实放在只能载重30磅的小篮子以避免压伤。
■Step 5:Input other structural parameters of frame and define the position of the nose pad and bridge, and select the type of lug.
再填上镜框结构数据,设定叶子及鼻梁位置等。同时,选择庄头形状。
■Lugs should not be used to adjust misalignment in piping.
凸耳不应该用来作为管道校准。
■Lug-style is a wafer body but has tapped lugs matching up to bolt circle of Class 125/150 flanges.
凸耳式:平板式阀体,但是具有螺纹凸耳,用于通过螺栓与125/150磅级法兰连接。
■Lug body available with ISO flange dimensions and metric bolt hole threads.
凸耳式阀体符合ISO法兰尺寸和公制螺栓孔螺纹。
■Lug Style valves cover the bolting the entire length of the body.
凸耳类型阀门配置贯穿整个阀体长度的螺栓连接。
■Lug design with through-bolt holes to protect studs
凸耳结构,配置贯穿螺栓孔以保护柱头螺栓
■Lug body available with ISO flange dimensions and metric bolt hole threads. For dead-end service use lug style (rated 200 PSI for this service).
凸耳阀体也可配置ISO法兰尺寸和公制螺栓孔螺纹。用于终端位置可采用凸耳结构(此时额定压力为200PSI)。
■Lug valves are furnished in scallop and full body designs.
凸耳阀门具有扇形结构和全阀体结构。
■Lug valves can be specified with threaded or thru-hole bolting.
凸耳阀门可规定采用螺纹孔螺栓连接或贯穿孔螺栓连接。
■Cutting, notching, mitring, welding, fabricating, drilling, delivery, unloading, handing, assembling, hoisting, fitting and fixing in position, bedding, filling in solid and pointing including necessary lugs or other attachments.
切割、开槽、法冠接、焊接、制造、钻孔、交货、卸载、处理、装配、提升、原位装置和固定,打底、固后填充以及勾缝,包括必需的拖线片或其它附件。
■lug support with stiffening ring
刚性环耳式支座
■Use lifting lugs where provided.
利用所配置的提升凸耳。
■Unidirectional double soldering lug leading-out terminal. Is suitable in the refrigerator, the washer, the automobile and so on general motor starts.
单向双焊片引出端。适用于冰箱、洗衣机、汽车等通用马达起动。
■The panel is mainly constructed by faceplate, reinforced rib, and lugs, etc.
单层氟碳幕墙铝板主要由面板、加强肋、挂耳等组成。