unscrewing
拧下
例句与用法：
Separate the two pipes by unscrewing them.
松开螺丝把两根管子拆开。
词形变化：
动词过去式: unscrewed | 动词过去分词: unscrewed | 动词现在分词: unscrewing | 动词第三人称单数: unscrews |
unscrewing
词形变化：
动词过去式: unscrewed | 动词过去分词: unscrewed | 动词现在分词: unscrewing | 动词第三人称单数: unscrews |
同义词：
take off | remove | detach | loosen | undo |
反义词：
screw |
unscrewing
■Unscrew the carrier locking screw (item 2 in FIGURE 3-1) on the carrier handle (3.
鬆開托座把手上的托座鎖定螺絲(圖3-1中的項目2))。
■(1) Wear an ESD-preventive wrist strap and unscrew the captive screws on the card with a Philips screwdriver.
(1) 佩戴防静电手腕，用十字螺丝刀松开单板的固定螺钉。
■Use to unscrew Flame Adjuster Nut & Pump’s Stop Nut.
---用来旋松火焰调节器螺帽和泵的限位螺帽。
■2) Clean the surface around the dipstick and unscrew the dipstick (1).
2）清洁量油计周围表面，然后拧开量油计（1）。
■Unscrew battery magazine button, discharge battery magazine, load Six AA size batteries or one to two LP-E5 lithium battery into battery grip, screw up battery magazine button.
3旋开电池夹旋钮，取出电池夹，将装好AA电池的电池夹或装好一粒与两粒LP-E5型号锂电池的锂电池夹插入手柄，旋紧电池夹旋钮。
■6 A man dining alone was trying to unscrew the cap of a bottle of catsup but his fingers were so badly crippled by arthritis that he couldn’t do it.
一个人正在进餐，他想拧开调味番酱瓶盖，但是，他的手指因关节炎而留下严重残疾，拧不开瓶盖。
■One-half bottle preparation: Unscrew cap and remove 2 tablespoons of liquid with a measuring spoon.
一半瓶编写：松开帽子和删除2汤匙的液体，测量汤匙。
■The mould for unscrewing screws in narrow space
一种针对拆装空间窄小的螺丝拆装模具
■To refill the stove with fuel, one would simply have to unscrew the foot, in line with the control knob, and then either pour (if liquid) or screw in (if gas) the raw fuel.
为了填充燃料的炉子，一个只会有拔螺丝脚，符合控制旋钮，然后倒入（如液体）或螺钉（如天然气）的原燃料。
■To unload the spring compression, loosen the all-thread and then double nut the all-thread and unscrew the rod from the spider and shaft base.
为了松开弹簧压缩，要松开所有螺纹，然后松开两个螺母，将螺纹杆从星轮底座上旋转螺纹松开。
■To reverse the seat disc, unscrew the disc screw and disassemble the disc washer and disc rubber from the disc holder assembly.
为了翻转阀座阀瓣，则要拧松阀瓣螺丝，从阀瓣固定器总成拆解阀瓣垫圈和阀瓣橡胶。
■This feature can be disabled to prevent tampering or accidental misuse of the fast fill feature by simply unscrewing the fast fill lever cap and removing the push rod.
为了避免乱用或错用快速进水功能，可以取消这个功能，方法很简单，只需将快速进水杆帽上的螺丝旋下来，并拆卸压杆即可。
■You may have to unscrew the gear (3 screws)to access the right hand latch, but I am not sure of that.
也许你需要松开齿轮(3颗螺丝)来卸下右手边的卡子,不过我不是很确定.
■The products, with nice appearance, good sealing, convenient unscrewing, are widely used in fields like juice, fruits, beverage, seafood, honey as well as medine.
产品广泛适用于果酱、饮料、酱菜、水果、糟醉、海鲜、蜂蜜等食品和医用药品的玻璃瓶盖，具有外形美观光滑、密封性好，开启方便等优点。
■Unscrew the diaphragm from the compressor.
从压缩装置上拧松隔膜。
■Unscrew the low pressure cycling clutch switch from the fitting on the top of the accumulator.
从贮集器上部配件上拧开低压循环离合器开关。
■The cartridge is removed by carefully unscrewing the base until the cartridge detaches from the holder .
仔细从底部拧开滤筒，直到从固定物上离开。
■Using a Chemtrol spanner wrench1, unscrew the seat-carrier (Tru-Bloc Model-C) by rotating in the counterclockwise direction.
使用一把Chemtrol活动扳手1，通过逆时针方向旋转拧松阀座支架(Tru-Bloc型号C)的螺纹。
■Regarding the locks, I found out if we turn the water on there is enough friction to unscrew the lock.
关于这些水闸，我发现如果我们打开水，会有足够的摩擦力旋开水闸。
■Locking the rotation of the laminar coupling (2)with the reaction lever 99370317(1)and using a suitable wrench unscrew the retaining screws (3), remove the laminar coupling and the flange.
利用止动杆99370317(1)锁定迭片式联轴节(2)不让其转动，并且使用适用的扳手松开固定螺钉(3)，将迭片式联轴节和法兰卸下。
■Unscrew your harmonica. Then take a wet tissue and clean the parts. Dry them with a dry tissue, then put your harmonica back together.
卸下口琴上的螺丝，然后用一块湿润的纸巾来清理内部的部件，再用干纸巾擦干。最后把口琴用螺丝装起来。
■4) When the connection is broken, unlatch tongs and unscrew the pipe using chain tongs or pipe spinner.
卸开扣后，打开大钳用链钳或旋扣器旋开扣。
■but the caps should not be glued to the screw brass pieces, instead it should be clicking on the brass piece, so it can be removed then the user can unscrew the cap.
参考翻译：但是盖子不要粘到螺纹黄铜件上，而要旋入，这样盖子就可以被拿开，即用户可以旋开盖子。
■Unscrew the bonnet by turning counterclockwise.
反时针方向旋转拧松阀盖。
■Remove shear pin (28) and unscrew bearing cap (16) using a 24ln pipe wrench. Remove "O"rings (25) from bearing cap (16). If they require replacement, remove grease fittings (15).
取走剪销(28),用24"管钳拧下轴承盖(16).从轴承盖(16)上除去O形圈(25).如需更换黄油咀(15)就取下来.
■It can be removed by simply unscrewing with a large pipe wrench.
只需用一把较大的管道扳钳旋下螺纹就可以拆卸底部塞弹簧总成。
■Embellished with deadly intent. These gothic poison-pill holder cufflinks unscrew to reveal their secret cavity. Crafted in solid metal and plated with rhodium.
可加入致命的毒药。袖扣隐藏着的秘密可以掩盖佩戴者的险恶阴谋。镀铑。
■While unscrewing the injector button head, a second wrench must be used to assure that the injector body is not loosened from the main valve.
在拧松注入器圆头螺栓时，要用第二个扳手固定住注入器，防止其从主阀门上松落下来。
■If the final customer can unscrew the pump from the bottle, the customer can let air into the bottle.
如果最终客户可以拔螺丝泵从瓶中，顾客可以让空气进入瓶内。
■Perfect man-machine engineering Unscrew perch pin ensures reliable connection.
完美人机工程高位插脚防松设计,使插接更牢靠。
■Heat and unscrew all the cap screws.
将全部有头螺钉加热并拧下来。
■Remove the original top from the DDC pump BY UNSCREWING THE 4 SCREWS ON THE BASE OF THE PUMP, plase the o-ring back onto the pump.
将原来的泵盖打开，请小心拧下面的螺钉，别碰坏防水橡胶圈，别忘记把防水橡胶圈放回泵里面去。
■Unscrew an electric bulb
将灯泡旋转下来
■Unscrew #2 Check (turncounter-clockwise) by placing along screwdriver across lugs and applying pressure to loosen #2 Check.
将螺丝起子向前插入穿过凸耳桉逆时针方向旋转2号止回阀的螺纹，并施加压力松开2号止回阀。
■To reverse the seat disc, unscrew disc screw and disassemble disc washer and disc rubber from disc holder assembly.
将阀座阀瓣颠倒，旋下阀瓣螺丝，从阀瓣固定器总成上拆卸阀瓣垫圈和阀瓣橡胶。
■Protection against unscrewing is provided by pinning the plug an stem together.
将阀杆和阀栓固定住以防止螺母松动。
■2) bend the ad justable end retaining wa sher tabs, unscrew the locking nut;
弯曲可调节端面弹簧垫圈调节片，旋出紧固螺母。
■At that moment I was very busy trying to unscrew a bolt that had got stuck in my engine.
当时我正忙着卸下卡在引擎上的螺丝钉。
■What is the difference between a pregnant woman and a light bulb? A: You can unscrew a light bulb.
怀孕的妇女与灯泡有什么区别?答:你可以把灯泡拆卸下来。
■Slowly unscrew bleed screw on SVB (about three turns).
慢慢放松关闭阀B上的排气螺丝（大约三圈）。
■I can not unscrew the top of this bottle.
我拧不下这瓶的盖子。
■1.) Partly open the roof and unscrew the centring pin on the relevant side (see enclosure).
打开一部分车顶，拧松相应一边的定心销(见附件)。
■Unscrew the battery compartment cover;
打开电池盖;
■influence that extended to other continents; table legs that extend by unscrewing
扩大到其它各洲的影响；松开螺丝，桌脚即可伸长
■unscrew battery slot cover at the downside of the machine, then pull out the battery socket.
把机子底面的电池盖螺丝拧开,然后把电池插座拔出来;
■3.Fit the plunger in the barrel with the crossbar engaged in the bayonet socket.Withdraw the plunger as far as possible by unscrewing anti-clockwise to the maximum extent.
把活塞装入带卡口的杯体中，之后按逆时针方向松开卡口底座螺丝将活塞经可能地拔出到最大体积。
■Unscrew the doors themselves from their jambs!
把门也从门框上拆下来！
■Unscrew the one screw holding the PCB down to the plastic housing.
拔螺丝一个螺丝举行的PCB到塑料外壳。
■unscrew a light bulb
拧下灯泡
■unscrew 6 screws on the mainboard and take out the mainboard.
拧开主板上的六枚螺丝,把主板取出;