solidification
[sə.lidifi'keiʃən]
n. 团结, 凝固, 固体化
例句与用法:
Ice is water in solid state.
冰是水的固体状态。
The miners were solid on this issue.
矿工们在这件事上是一条心的。
Cheese is a solid; milk is a liquid.
乾酪是固体,奶是液体。
The country was solid for peace.
全国上下都希望和平。
They were glad to leave the boat and put their feet on the solid ground.
他们很高兴能离开海船,回到坚实的陆地上。
Water becomes solid when it freezes.
水结冰时便变成固体。
词形变化:
副词: solidly | 形容词比较级: solider | 形容词最高级: solidest | 名词: solidness |
n.
1. 团结
2. 凝固; 固体化
solidification
词形变化:
副词: solidly | 形容词比较级: solider | 形容词最高级: solidest | 名词: solidness |
同义词:
thing | firm | whole | strong | continuous | sturdy | substantial | rigid | hard | durable | entire | complete | object | artifact | artefact | item | unanimous | figure | pyramid | tetrahedron | sphere | icosahedron | crowded | credible | indivisible | concrete | massive | block | cube | fixed | changeless | physical | inseparable | dense | constant | beefy | unshaken | stocky | single | muscular | resistant | sound | fast | hearty | square | satisfying | solid state | upstanding | self-colored | solidness | self-coloured |
反义词:
liquid | hollow | gaseous | fluid |
词义辨析:
同义参见:
condensation
compression
coherence
solidificationsolidification[ˌsɔlidifiˈkeiʃən]n.1.■团结; 凝固;【化】固体化(作用); 浓缩; 结晶
solidification
名词 solidification:
the process of becoming hard or solid by cooling or drying or crystallization
同义词:hardening, solidifying, set, curing
solidification
■Rapid solidification microstructures of Cu-Cr binary hypereutectic alloy at deep undercooling[J].The Chinese Journal of Nonferrous Metals, 2002, 12 (5): 891-896.
Cu-Cr二元过共晶合金的深过冷及快速凝固[J]. 中国有色金属学报, 2002, 12(5): 891-896.
■EBIC results showed that the recombination properties of grain boundaries and dislocations were related to the solidification positions of ingot.
EBIC结果显示铸造多晶硅中晶界和位错的复合特性与晶锭的凝固位置有关。
■QI Lehua,et al.Artificial networks for direct extrusion in the solidification of metals [J].The Chinese Journal of Nonferrous Metals,1999,9(3):586.
[8]齐乐华,侯俊杰.金属液凝固中直接挤压工艺的神经网络[J].中国有色金属学报,1999,9(3):586.
■Acetate hydroxide trihydrate has serious supercoohng and phase segregation during solidification.
三水醋酸钠在凝固过程中存在严重的过冷和相分层。
■It is found that the UTS rose with the increase of the maintaining pressure for solidification.
不同基体的复合材料拉伸强度均随保压压强增高而提高。
■Not to nozzle parts inflatable will not sweat, oil, drugs (alcohol) touched nozzle, from the ink composition, viscosity changes, resulting in ink solidification obstruction.
不要向喷嘴部位吹气、不要将汗、油、药品(酒精)等沾到喷嘴上,引起墨水的成分、黏度的变化,造成墨水凝固阻塞。
■There is no other beauty can compare its solidification and content with architectures.
世上还有哪一种美比建筑的美更具有凝固性和包容性。
■Some potentially active materials should be added into the mud and MTC paste should be used in strong alkalis condition,in order to get good solidification.
为了提高固化效率,泥浆中应预先掺加潜在活性的材料,并在强碱性环境中使用MTC浆。
■A mathematical model was built to describe the transportation phenomena and the freckle formation during the solidification process of multicomponent Ni-base superalloy.
为了研究铸造高温合金中的斑点偏析,建立了描述多元合金凝固过程传输行为的数学模型。
■To avoid liquidation and/or solidification on inking rollers.
为了避免油墨凝固在滚筒上,
■According to the proportional solidification theory to adopt non-riser design on it, the feeding result does the same as the riser does.
为提高工艺出品率,生产中按照均衡凝固理论进行无冒口工艺设计,取得用冒口补缩同样的效果。
■For a long time in the future, the orientation for development of EDLC electrolyte is wide potential window, high electric conductivity, wide temperature range and solidification.
今后很长一段时间内,EDLC电解质的发展方向是宽电位窗口、高电导率、宽使用温度范围和固体化。
■A new solidification process using AASC (alkali-activated slag cement) to immobilize HLW (high level waste) is introduced in the article.
介绍了用碱矿渣水泥固化高放废液新工艺。
■The paper introduces the experimental teaching case of the measurement of metal solidification temperature field.
介绍材料成型与控制专业材料成形原理中测定金属凝固温度场实验的教学案例。
■Basic laboratory research, as well as solidification theory, indicate that there are two distinct paths to form the desired structure for semi-solid forming.
从基本的实验室研究及固化原理上看,有两种完全不同的方法形成理想的半固态结构。
■The dominant mechanism of electric pulse exerted upon the metal solidification process is inducted and analysed in theory.
从理论上归纳和分析了脉冲电流在金属凝固过程中产生作用的主要机制。
■It analyzes the main facts that affect the surface roughness of the workpiece through the process of vacuum-casting and solidification.
从硅胶模具的真空注塑和制件固化过程分析了影响制件表面精度的主要工艺参数。
■Conventional planar flow casting(PFC)is one of rapid solidification processes for fabrication of microcrystalline or amorphous ribbons.
传统平面流铸技术是用于生产微晶或非晶合金薄带的一种快速凝固技术。
■However, impurity aluminum must be enriched on the grain boundary during the crystallizing process.So, we can't removal it completely by directional solidification.
但由于在结晶过程中晶界上会富集部分铝元素,因而定向凝固法并不能除去这一部分杂质。
■Holding time is determined by the solidification time of the gate. We decide it according to the weight.
保压时间的确定以浇口冷凝为依据。通过产品称重来确定。
■By the new method, the formation of peritectic phases can be shown graphically throughout solidification.
借助于这种方法,在最终的模拟结果中可以显示包晶相的随机分布。
■Its products include float-zone crystal growers, Czochralski crystal growers, poly-silicon reactors, directional solidification furnaces, Bridgeman crystal growers, etc.
其产品包括晶体区熔炉,直拉式单晶炉,多晶硅反应炉, 定向结晶多晶硅铸锭炉,下降式单晶炉等。
■The oxide growth in diameter during solidification is larger when the oxide size before solidification and cooling rate during solidification are smaller.
凝固前初始氧化钛越小,在凝固过程中氧化钛越容易长大。
■The solidification process takes 24 hours to complete and any surplus material supports the structure during manufacture and can be reused.
凝固过程需要24小时才能完成,任何剩余物质支持制造过程中的结构和可重复使用。
■Solidification by cooling or freezing.
凝胶化作用通过煮或冷冻使其变硬
■The different parameters symbolizing solidification quality and effect of solidification process parameters on solidification quality are analyzed.
分析了表征凝固质量的各种参数及凝固过程参数对凝固质量的影响。
■The microstructure of AZ91 magnesium alloy under magnetic field and without magnetic field during solidification was studied by XRD and OM.
利用XRD和OM分析等手段研究了高频电磁场对AZ91合金凝固态组织的影响。
■The DTA method was employed to measure the undercooling of samples during solidification.
利用差热分析法测定了试样在相同冷却速度下的过冷度。
■It is hopeful that the undercooling induced by a high magnetic field is big enough to make a whole solidification o...
利用强磁场有可能在材料中形成大的整体过冷,可实现材料的整体凝固。
■It is hopeful that the undercooling induced by a high magnetic field is big enough to make a whole solidification of bulk materials occurred.
利用强磁场有可能在材料中形成大的整体过冷,可实现材料的整体凝固。
■The solidification process of liquid metal in the CASTEX technique was studied by FEM(finite element method).
利用有限元法研究了连续铸挤工艺中液态金属的动态凝固过程。
■In this pape,the mechanical performance in semisolid state during solidification process of Al-Si alloys have been investigted by means of a self-made apparatus.
利用自制的准固态力学性能测试装置,系统地研究了铝硅会金凝固过程准固态力学性能。从固相率的角度统一定义了铝硅合金准固态区。
■Foundry CAE is applied in simulating a gear casting solidification and the casting technique is improved based on the simulation results.
利用铸造CAE方法研究齿轮铸件的凝固过程,基于模拟结果对铸造工艺进行了改进。
■Surplus sand that has not been embedded within the structure acts as a buttressing support while the solidification process takes place.
剩余砂尚未嵌入结构作为支撑的支持,而凝固过程发生。
■Pressed Solidification Process Equation of Compatibility.
加压凝固过程的谐调方程。
■To strengthen the enterprise systems solidification of the norms.
加强了企业系统规范的凝固力。
■Numerical simulation of solidification and heat transfer in the mold for the bloom caster in Baotou Iron and Steel Co.
包钢大方坯连铸机结晶器凝固传热的数值模拟。
■Glass fiber cotton and kapok board: Is the centrifugal cotton and kapok after solidification processing makes has certain intensity plate product.
华日玻璃纤维棉卷毡:是离心棉经过固化处理后制成的具有一定强度的卷材制品。
■A cellular automaton model was developed to simulate the primary spacing selection of dendritic array during directional solidification.
发展了一个元胞自动机模型来模拟定向凝固中枝晶阵列的一次间距选择。
■It is found that the shape and size of ingate of thin walled plate casting have a tremendous influence on the temperature field during solidification and its quality.
发现内浇口的形状和尺寸对铸件凝固过程中的温度分布及铸件品质影响很大。
■The hollowness of undrawn filaments is determined by the late of solidification which can bo increased when the formation conditions are Intensified.
发现卷绕丝之中空度受凝固速率控制。强化成形条件,使凝固速率加快,则中空度增加。
■In the other, spheroids form directly in the earliest stages of solidification.
另一个是在固化的最早阶段直接形成球状体。
■The regulation how some factors such as solute elements,solidification speed and so on,influence the segregation in s.g.iron was also described.
同时阐述了溶质元素、凝固速度等因素对球铁偏析的影响规律。
■Reflow Soldering: Melting, joining and solidification of two coated metal layers by application of heat to the surface and predeposited solder paste.
回流焊:应用加热金属涂敷层的表面和预涂焊膏,熔融,连接和凝固两个金属涂层。
■Curing: The rapid solidification of ink or varnish by means of chemical action.
固化:用化学方法使油墨或光油速变成固体。
■The regulars of directional current effecting ZL102 alloy solidification structures were studied in this paper.
在ZL102合金凝固过程中施加电流处理,研究电流对凝固组织的影响规律。
■In the course of solidification, TiC is prior to be precipitated and it is possible to be followed by Fe_2Ti and Fe_3C.
在凝固过程中,TiC相优先析出,随后可能有Fe2Ti、Fe3C等相析出;
■During the solidification of the composites, the silicon on the interface between the fiber and the matrix plays a leading role during the coupled growth of the eut...
在凝固过程中,纤维/基体界面上的硅在共晶体的共生生长过程中起了领先相作用,导致复合材料的共晶转变是由铝硅共晶转变和锌铝共晶转变两者组成。
■A two-dimensional unsteady temperature field calculation mathematical model has been set up by analyzing ingot solidification process and the program has been developed.
在分析锻造用钢锭凝固过程特点的基础上,建立起钢锭铸造凝固的二维非稳态温度场计算数学模型,并编制程序。
■In the process of solidification the same amount of heat is released.
在固结过程中则将释放出同等的热量。