solders
['sɑ:dər]
[ solders ]
n.焊接剂, 接合物
v.焊接
例句与用法:
He soldered the wire back on.
他把金属丝重新焊上去了。
词形变化:
名词: solderer | 动词过去式: soldered | 动词过去分词: soldered | 动词现在分词: soldering | 动词第三人称单数: solders |
solders
词形变化:
名词: solderer | 动词过去式: soldered | 动词过去分词: soldered | 动词现在分词: soldering | 动词第三人称单数: solders |
solders
名词 solder:
an alloy (usually of lead and tin) used when melted to join two metal surfaces
同义词:solder
动词 solder:
join or fuse with solder
同义词:solder
solders
■The 1710 series threaded and solder end range are "T" pattern globe style valves.
1710系列螺纹和焊接连接端口为T形截止阀结构的阀门。
■Solder side is chosen to measure.
4量测以吃锡面为选择点。
■BGA measurement is measured for inside solder point.
BGA量测以最内侧焊点为量测依据。
■DKL Metals has been one of the UK’s leading suppliers of high purity solders for over 20 years.
DKL金属一直是英国的领先供应商的高纯度焊锡超过20年。
■Q: Will IPC be publishing a new specification for inspection of lead-free solder joints?
IPC是否会颁布新的关于无铅焊接的质检标准?
■Northrop Grumman Corporation announces the introduction of PureMark 202 no-clean solder paste by Kester.
Northrop Grumman公司宣布,PureMark 202免清洗焊锡膏已由凯斯特推出。
■Northrop Grumman Corporation announces the introduction of FL250D, a no-clean solder paste by Kester.
Northrop Grumman公司宣布由凯斯特推出FL250D免清洗焊锡膏。
■RF742 is a No-Clean Paste Flux compatible with FL250D NO Clean Solder Paste.
RF742是一种可以与FL250D免清洗焊锡膏相容的免清洗焊锡膏。
■TCS-509-5042S(F12-1) is Lead free, RA type solder paste which is designed to be washable.
TCS-509-5042S(F12-1)是无铅活化松香型焊锡膏,可以水洗。
■A general profile setting up a wave solder machine to optimize reflow using an alcohol base flux.
一种常规温度特性曲线,用于对波焊机进行设置,对采用以酒精为基本成分的焊剂回流进行优化。
■SMOBC: Solder mask over bare copper.
一种阻焊层覆盖裸铜的工艺。
■Type of high density solder mask.
一种高密度焊料掩膜。
■Generally the same fluxes will work for lead-free solder.
一般来说,相同的焊剂用于无铅焊料是有效的。
■Generally, solder alloys with more than about 8% bismuth will be brittle.
一般来说,铋含量超过8%的焊料合金将会变脆。
■Generally, the wetting time of solders decreases with increasing temperature, gradually reaching a relatively steady state.
一般来说,焊料的润湿时间随着温度的升高而缩短,并逐渐进入到相对稳定的状态。
■As early as the Three Kingdom Period, YuanShao, a famous duke, once had millions of solders stationed in Jizhou City in order to fight Caocao, another famous duke.
三国时期袁绍曾于冀州屯兵百万与曹操抗衡,西汉大哲学家、儒家学派一代宗师董仲舒就生于衡水景县。
■Not all MCMs have Solder Balls or Leads to realize electrical connecting.
不是所有的MCM都采用焊球或引脚和外界相连。
■Do not solder directly to cells or batteries.
不要直接对电池进行焊接。
■The stainless tubing is less likely to kink than copper, but it is harder to solder without an acid treatment.
不锈钢管比铜管不易纠结,但不经酸性处理焊接较困难。
■Stencils for printing solder paste, glue. Laser cut, electric-formed, chemical itched.
丝印模板,锡浆网,胶水网
■Sn-Ag-Cu ternary and Sn-Bi binary alloys are commercial lead-free solders and widely used in electronic industries.
中文摘要银-锡-铜三元合金与锡-铋二元合金为现今工业中常用之无铅焊料。
■Noctua solders the heat pipes to the cooling fins in order to assist the heat conductivity.
为了更高热传导性能,Noctua对冷却片焊接热管。
■To achieve the required bump heights, the solder paste is over-printed onto the wafer bond pads.
为了获得要求的凸起高度,锡膏在晶片焊盘过焊。
■Solder end valves also available.
也可以提供焊接连接端口的阀门。
■The amount of refund tax should be consult with the solder .
买单公司的退税金额应该和卖单企业商议。
■So it will result in rigidity skin &block and solder balls etc.
产生的后果是:锡膏出现硬皮、硬块、难熔并产生大量锡球等。
■Discuss the inexorable trend for application of lead-free solders from environmental protection.
从环保角度出发,阐述了无铅钎料使用的必然性。
■That defect could cause solders to crack and the flight control system to fail, Ernst explains.
他拒绝提供细节,他的观点是,假零件肯定会导致严重事故。
■It is used for pressure and vacuum of ammoniac liquid and gas as well as of zhe madia which cannot corrode carbon steel, stainless steel and solders like tin and lead.
仪表适用于测量氨的液体和气体的压力真空,也可测量对碳钢、奥氏体不锈钢和锡铅类焊料无腐蚀作用的介质的压力和真空。
■It is used for pressure and vacuum of ammoniac liquid and gas as well as of zhe madia which can't corrode carbon steel, stainless steel and solders like tin and lead.
仪表适用于测量氨的液体和气体的压力真空,也可测量对碳钢、氏体不锈钢和锡铅类焊料无腐蚀作用的介质的压力和真空。
■Very low leakage current, compact, easy to use power entry filter with fast on tabs or solder terminals.
低漏电流,小巧,端子嵌入或焊锡,方便安装和使用。
■One consequence of using lead-free solders with high tin content is tip erosion, iron tips may require replacement more regularly.
使用具有较高锡含量无铅焊料容易造成烙铁头腐蚀,因而可能需要较为频繁地更换烙铁头。
■All electronics assemblies using lead in solder.
使用含铅焊料的所有电子配件。
■What are the patent issues with using lead-free solder?
使用无铅焊料涉及的专利问题有哪些?
■What are the main qualification tests for using lead-free solder paste?
使用无铅焊锡膏的主要评选测试有哪些?
■Stir solder paste in container before use.
使用时搅拌容器内的焊膏。
■Examples are insufficient solder, a misaligned component, a missing bypass capacitor and an open power pin.
例如,不够充足的焊料,元器件对准不佳、遗漏旁路电容和电源针开路。
■Separation of the component lead from the solder fillet.
元件面或焊锡面的零件脚旁焊锡裂开。
■Bare laminate, copper, solder resist or other surface.
光面基材,覆铜板,绿油之或其它表面。
■There are concerns to be addressed with component and board finish compatibility with lead-free solders.
关于无铅焊料,在元器件和线路板终饰兼容性方面有几个人们关心的问题需要予以说明。
■Pb-free solder;BGA;thermal cycling;dynamic fatigue tests;electrical analysis.
关键词:无铅焊锡;球格阵列构装;冷热循环试验;动态疲劳试验;电性分析
■The requirement of the cleaning level is more than the water on metal, for there must be close bonding between solders and metals.
其清洁水准的要求比水于金属板上还要高很多,因为焊锡和金属之间必需是紧密的连接。
■Officers: These are the more experienced and highly trained solders in your army.
军官:它们是你的军队中富有经验的受过良好训练的士兵。
■The company was founded in 1899 as the Chicago Solder Company to produce flux-cored solder.
凯斯特公司创立于1899年,当时公司名为芝加哥焊锡公司,主要产品是带有焊剂芯的焊锡。
■The dynamic compressive properties of Sn-Ag Pb-free solders have been studied by means of a split Hopkinson pressure bar at high strain rates.
利用分离式霍普金森压杆试验技术,在室温下研究了锡-银系无铅焊料在高应变率条件下的动态压缩力学性能。
■By noontime the soldiers' clothes were wet through with sweat, and the marching speed slowed down.Some solders of weak physique even fainted on the roadside.
到了中午时分,士兵的衣服都湿透了,行军的速度也慢下来,有几个体弱的士兵竟晕倒在路边。
■Flux: The material used to remove oxides from metal surfaces and enable wetting of the metal with solder.
助焊剂:用于除去金属表面氧化物并使焊料能润湿金属表面的材料。
■Washington wants Japan to dispatch solders to the war in Afghanistan.
华盛顿希望日本为阿富汗战争派遣自卫队员,
■Is the upper and lower specification limits for individual Solder Paste height measurements also defined?
单点锡膏厚度测量是否定义了其控制上限和下限?
■Reflow solder paste in 2 hours as soon as possible after printing.
印刷后要在2小时内回流焊膏。